Edit Menu

The Edit menu can be accessed from the horizontal top bar menu at the top of the screen.

General

• Undo (Ctrl+Z) - undo last operation
• Redo (Ctrl+R) - redo last operation
• End stream (Enter) - end the partition stream creating a floating partition
• Cancel current operation (Escape) - cancel the current operation returning to select mode
• Undo last point (Escape) - undo the last point drawn when creating a block or when drawing partitions
• Clear to default - clear model data to defaults
• Load data from template (Ctrl+L) - loads data from template
• Reload non-default templates - loads data from template throughout model where template is non-default
• Transfer blocks - transfers blocks from one building to another
• Convert selected outlines to blocks - convert any selected outlines to component or building blocks
• Drag block face -start the drag face operation on the currently selected block
• Divide block  - divide the currently selected block using the cutting tool
• Measure (Ctrl+M) - measure length, angles or areas in the model

Draw

• Draw block – add a new block (building level only)
• Draw internal perimeter- draw a void/courtyard (block level only)
• Draw partition - draw partition streams (block level only)
• Draw window - draw windows (surface level only)
• Draw sub-surface - draw sub-surface (surface level only)
• Draw door - draw doors (surface level only)
• Draw hole - draw holes (surface level only)
• Draw vent - draw vents (surface level only)
• Draw construction line - draw one or more construction lines

Remove

• Remove DXF data - remove all current DXF data
• Remove all construction lines - remove all construction lines
• Remove all outlines - remove all outline blocks

General

• Select - returned to select mode
• Select all - select all objects in current view

Equipment (zone level, Equipment tab when Detailed gains model option selected)

• Add - at an item of equipment
• Edit - edit currently selected equipment
• Delete - delete currently selected equipment

Opening screen component and template edit

• Add - add a new component/template as per currently selected item
• Edit - edit currently selected component/template
• Delete - delete currently selected component/template

Edit currently selected model objects

• Move (Ctrl+V) - move selected objects
• Clone (Ctrl+C) - clone (copy) selected objects
• Rotate (Ctrl+T) - rotate selected objects
• Stretch (Ctrl+J) - stretch selected objects
• Delete (DEL) - delete selected objects

General                        

• Building model options (F11) - open Model options dialog
• Add building (Ctrl+A) - add a new building (site level only)