3d model not displayed

Help on setting up the building geometry, including importing from BIM

Moderator: DesignBuilder Support

ar.nidhi.dixit
Posts: 3

3d model not displayed

Postby ar.nidhi.dixit » Thu Oct 16, 2014 6:33 am

i have been facing this issue for a couple of days. i cannot see the geometry of the building. the basic interface has changed on its own.

1.Can see only part of the interface at one time.The building level with zone names or the edit tabs. cant see the 3d at all.

2.The analysis/ summary/ parametric are seen below.

even after 4 re-installations, the problem persists. i have attached the snapshots.
Attachments
db errors.docx
snapshots of interface
(289.84 KiB) Downloaded 121 times
davidshaw
Posts: 1

Re: 3d model not displayed

Postby davidshaw » Fri Dec 14, 2018 10:20 am

Hi, was this problem resolved? I have the same issue and would like to know how to fix it. Thanks
Luis Sousa
Posts: 370
Location: Stroud

Re: 3d model not displayed

Postby Luis Sousa » Fri Jan 18, 2019 4:10 pm

Hi,

I would suggest to update the GPU driver to see if it makes a difference. This sort of problems can occur with low spec integrated cards.

BR,
Luis

Return to “Geometric Modelling”

Who is online

Users browsing this forum: No registered users and 1 guest