3d model not displayed

Help on setting up the building geometry, including importing from BIM

Moderator: DesignBuilder Support

Posts: 3

3d model not displayed

Postby ar.nidhi.dixit » Thu Oct 16, 2014 6:33 am

i have been facing this issue for a couple of days. i cannot see the geometry of the building. the basic interface has changed on its own.

1.Can see only part of the interface at one time.The building level with zone names or the edit tabs. cant see the 3d at all.

2.The analysis/ summary/ parametric are seen below.

even after 4 re-installations, the problem persists. i have attached the snapshots.
db errors.docx
snapshots of interface
(289.84 KiB) Downloaded 86 times
Posts: 1

Re: 3d model not displayed

Postby davidshaw » Fri Dec 14, 2018 10:20 am

Hi, was this problem resolved? I have the same issue and would like to know how to fix it. Thanks
Luis Sousa
Posts: 364
Location: Stroud

Re: 3d model not displayed

Postby Luis Sousa » Fri Jan 18, 2019 4:10 pm


I would suggest to update the GPU driver to see if it makes a difference. This sort of problems can occur with low spec integrated cards.

Posts: 9
Location: Denmark

3d model not displayed

Postby Timothybap » Sat Feb 23, 2019 10:25 pm

You can turn off the zone floor shading by selecting the option 3-None at Model options>Display tab under Edit screen header > Zone floor shading at block level .

For more information see attached.


Return to “Geometric Modelling”

Who is online

Users browsing this forum: No registered users and 2 guests