Output tab on Lighting Templates Dialog.
Enter the lighting energy for task and general lighting in W/m2/100 lux (W/ft2/100 lux). This data is used for setting up the actual Lighting energy W/m2 data in each zone using:
Lighting energy (W/m2) = Lighting (W/m2/100 lux) x Design lux level (Activity tab) / 100
Substitute ft2 for m2 for equation in IP units.
The 'Output' data is used for generating default lighting loads based on lighting type and required illuminance levels as set in Activity data.
See General Lighting under Building Model Lighting Data for more information on the use of this template data in the model.