You can display the data in one of four ways:
Note: you must select the Grid option to export data in spreadsheet format.
DesignBuilder displays all simulation results together, but you can select how many days are displayed at any one time using The 'Days displayed per page' option. A value of 365 means you will show all simulation data on the same screen and a value of 1 means you see each day on a separate screen.
Note: you can use the horizontal scroll bar at the bottom of the graph to see simulation results not currently displayed.
These options give you control over how the Y-axis is displayed.
This option allows you to lock the extent of the Y-axis axes so that it keeps its current maximum and minimum values. This ensures consistent comparison with the future results display. The Y-axis keeps its current settings until you unlock it again.
You can achieve the same effect by clicking on the 'Lock Y-axis min/max
values' toolbar command.
When you lock the Y-axis the current settings are stored and displayed for each of the available Y-axes. You can edit any of these to get a more precise setting. Remember to click on the Apply button when you are ready to register a change to any numeric display option data.
Option allows you to save space on the Y-axis allowing different axes to overlap.
Check this option to add a vertical space between each of the displayed axes.
Check this option if you wish data to be displayed 'per floor area', i.e. /m2 or /ft2, for building, block and zone data and 'per surface area' for surface and opening level data.