Accessed from Parametric, Optimisation and UA/SA Analysis Settings dialog
Tip: The Analysis Outputs dialog should be used with caution because there is no Cancel button, so once the dialog is opened, any changes made cannot be undone and upon closing of the dialog, the output will be saved, replacing the previous one, with the settings currently being shown on the screen. In the case where you have mistakenly added an output (or made incorrect changes while editing an existing one) you can close the dialog and then delete the incorrect output on the Outputs tab on the main Edit Parametric, Optimisation and UA/SA Analysis Settings dialog. Alternatively if you haven't made any other changes since opening the main dialog , simply press Cancel on that dialog to lose all changes.
The Outputs dialog can be accessed from the Parametric, Optimisation and UA/SA Analysis Settings dialog, when 3-Uncertainty/ Sensitivity Analysis is selected on the Analysis Type Tab, after pressing Add Output or Edit Output.
User defined name for the outputs, e.g. "ASHRAE 55 discomfort hours"
The pre-defined output result option. These outputs are Building Level results.
Select a predefined or custom Key Performance Indicator (KPI) from the list.