Construction and glazing model Option

Data tab on Model Options dialog.

Construction and glazing

The Construction and glazing model option controls the way Construction templates are loaded on the Construction model data tab. When the option is set to Pre-design you can load construction templates using the Insulation and Thermal mass slider controls. When set to General, Construction templates are loaded by selection from a Construction templates browse list in the usual way. General is the default setting.

Multi-state electrochromic control method

There are 2 ways to set up sensors to control the tinting of Multi-state electrochromic systems. These 2 methods are accessed through the options:

• 1-Sensor groups the default option where a single sensor sensing exterior incident solar radiation can be used to control multiple windows. In this case the signal from a single sensor window is used to control all windows with the associated SageGlass® window shading system applied.
• 2-Individual sensors where each window has its own built in sensor and there is no need to define control connections between windows and sensors.