Wind Turbine Systems
How to Model a Wind Turbine System - Summary
You can include one or more wind turbines in your model by following the instructions below.
- First define the electric side of the wind turbine system at building level on the Generation model data tab under the On Site Electricity Generation header:
- Check the Include electric load centres check box.
- Add an Electric load centre and edit the details of the system.
- Use one of the AC buss types.
- If using storage define the Storage type.
- Select the wind turbine on the Generator list tab.
- Make sure that having defined a new Electric load centre that the correct one is selected on the Generation model data tab.
- When the simulation is finished you can view wind turbine contributions in absolute and % terms on the Summary tab: