Building Model Data can be entered at building, block, zone and surface levels (but not at site level). The set of data shown will depend on the level in the hierarchy (building, block etc) and on the Model options selected.
Default data is inherited from the level above in the hierarchy and is shown in blue, while 'user data', i.e. data you have explicitly set (or loaded from template) is shown in red. You can clear user data back to its default state so it inherits from the level above using the Clear data to default command.
Building Model Data is laid out on the tabs:
Each of these categories of data has a template selection at the top of the tab allowing rapid loading of the data from template.
Tip: Use DesignBuilder defaults wisely!
See also section on Model Data Hierarchy & Data Inheritance.