Edit Menu
The Edit menu can be accessed from the horizontal top
bar menu at the top of the screen.
General
- Undo <Ctrl+Z> -
undo last operation
- Redo <Ctrl+R> -
redo last operation
- End
stream <Enter> - end the partition stream creating a floating
partition
- Cancel current operation
<Esc> - cancel the current operation returning to select mode
- Undo last point <Esc>
- undo the last point drawn when drawing a block base perimeter or when drawing partitions. Note that when drawing arcs, the Undo last point command doesn't undo the whole arc, it operates on one arc line segment at a time. To undo the whole arc, press <Esc> as many times are there are lines in the arc.
- Clear
to default - clear model data to defaults
- Load
data from template <Ctrl+L> - loads data from template
- Reload
templates - reloads data from template throughout
model where the template is non-default
- Transfer
blocks - transfers blocks from one building to another
- Convert
selected outlines to blocks - convert any selected outlines
to component or building blocks
- Drag
block face -start the drag face operation on the currently
selected block
- Divide
block -
divide the currently selected block using the cutting tool
- Measure
<Ctrl+M> - measure length, angles or areas in the model
Draw
Remove
- Remove DXF data
- remove all current DXF data
- Remove
all construction lines - remove all construction lines
- Remove all outlines
- remove all outline blocks
Select
- Select
- returned to select mode
- Select all - select
all objects in current view
Equipment (zone level, Equipment tab when Detailed gains model option
selected)
- Add
- at an item of equipment
- Edit
- edit currently selected equipment
- Delete
- delete currently selected equipment
Opening screen component and template edit
- Add - add a new
component/template as per currently selected item
- Edit - edit currently
selected component/template
- Delete - delete
currently selected component/template
Edit currently selected model objects
- Move
<Ctrl+V> - move selected objects
- Clone
<Ctrl+C> - clone (copy) selected objects
- Rotate
<Ctrl+T> - rotate selected objects
- Stretch
<Ctrl+J> - stretch selected objects
- Delete
<Del> - delete selected objects
General